Bottom Freezer Repair
THERMADOR FRENCH DOOR · BUILT-IN SERVICE
What we service
Built-in, panel-ready and freestanding, from refrigeration columns to ventilation.
Refrigeration
Cooktops & Rangetops
Ranges, Ovens & Microwaves
Dishwashing & Ventilation
Reviews
"Booking was simple, and the technician arrived during the scheduled window. The visit went well."
Lauren P.
"Chris at the office was helpful when I called to schedule. The technician was polite and worked efficiently."
Robert H.
"I received a clear explanation of the cost before the work began. The service met my expectations."
Amanda S.
"The technician showed up on time, answered my questions, and left the area clean."
Brian C.
Why us
A built-in refrigerator is joinery as much as it is refrigeration. Both halves have to go right.
Dual evaporators, mullion heaters, dampers, drawer rails and ice systems on French door models are familiar before the panel is off. We diagnose the system, not just the symptom.
Evaporator fans, defrost heaters, thermostats, inlet valves, door gaskets and common control boards ride with the technician.
A firm price on site. It does not change once work starts.
Parts and labor, in writing. Same fault inside that window and we return at no charge.
Doors and drawers carrying custom millwork come off and go back without marking your cabinetry.
A warming refrigerator is not a next-week problem. Same-day slots are held open including weekends.
Our work
Real Thermador french door refrigerator service examples from completed work orders.
1 / 3Recent repair
Model: T36IT800NP/64
The door would not pull itself closed and a visible gap remained along the seal.
The rail, hinge or closer hardware was bent or worn, preventing full alignment.
Replaced the right freezer slide rail and door closer, changed the water filter and cleaned the condenser coil.
The door now glides shut, sits flush with the cabinet and maintains an even seal without being pushed.
1 / 5Recent repair
Model: T36IT71NNP/34
The display reset unexpectedly and the refrigerator stopped responding to temperature changes.
The electronic control board was losing output to the cooling and display circuits.
Rebuilt the main control board and replaced the display board; installed parts and labor include a warranty coverage of up to 1 year.
Temperature settings and the display now remain stable while the compressor and fans cycle normally. The installed parts and labor are covered for one year.
1 / 1Recent repair
Model: T36IT70NNP/17
The display reset unexpectedly and the refrigerator stopped responding to temperature changes.
The electronic control board was losing output to the cooling and display circuits.
Replaced the control board and condenser fan motor, completed maintenance and included a warranty coverage of up to 1 year.
Temperature settings and the display now remain stable while the compressor and fans cycle normally. The installed parts and labor are covered for one year.
1 / 9Recent repair
Model: T36IT800NP/24
Ice kept building up inside the compartment and water appeared beneath the drawers after each defrost cycle.
The defrost or drain-heating circuit had failed, allowing the drain channel to freeze and block meltwater.
Replaced the defrost and drain-line heaters, completed a full defrost, cleared the drain and tested the system.
Defrost water now reaches the drain pan, frost no longer accumulates around the coil and the compartment stays dry.
1 / 10Recent repair
Model: T36BT920NS/07
The door would not pull itself closed and a visible gap remained along the seal.
The rail, hinge or closer hardware was bent or worn, preventing full alignment.
Replaced the door opening/closing button and damaged shelf plastic.
The door now glides shut, sits flush with the cabinet and maintains an even seal without being pushed.
1 / 5Recent repair
Model: T36BT910NS/03
The door would not pull itself closed and a visible gap remained along the seal.
The rail, hinge or closer hardware was bent or worn, preventing full alignment.
Replaced the freezer door-closing parts, changed the water filter and completed maintenance.
The door now glides shut, sits flush with the cabinet and maintains an even seal without being pushed.
1 / 1Recent repair
Model: T36IT900NP/06
The door would not pull itself closed and a visible gap remained along the seal.
The gasket had lost tension and the closing hardware was not keeping even pressure around the cabinet.
Replaced the right door gasket and water filter, then cleaned the refrigerator and wine-cooler condenser coils.
The door now glides shut, sits flush with the cabinet and maintains an even seal without being pushed.
1 / 1Recent repair
Model: T36BT920NS/07
The refrigerator cooled normally, but it stopped producing usable ice.
The ice-maker mechanism failed to complete its fill and harvest sequence.
Replaced the ice-level sensor, ice-maker assembly and freezer light bulb, then cleaned the condenser coil.
Fresh cubes now release into the bin at the end of each cycle, and the freezer continues cooling at the proper temperature.
1 / 8Recent repair
Model: T36BT820NS/59
The door would not pull itself closed and a visible gap remained along the seal.
The rail, hinge or closer hardware was bent or worn, preventing full alignment.
Replaced the French-door flipper and verified correct door closure.
The door now glides shut, sits flush with the cabinet and maintains an even seal without being pushed.
Common faults
Twin upper doors, a lower freezer drawer, dual cooling and an ice system create several failure patterns that look similar from the kitchen.
A failed evaporator fan, blocked air channel or stuck damper can stop cold air from reaching the upper cabinet while the freezer continues to hold temperature.
The folding center flap must enter its guide every time the left door closes. Hinge movement or a worn guide leaves a warm-air gap between the doors.
Moisture around the center seal usually points to door alignment, the mullion heater or a gasket that no longer contacts evenly.
The fill tube, inlet valve, temperature sensor and ice-maker module must all agree before a harvest cycle starts. Testing them separately prevents guesswork.
Heavy food loads and panel-ready fronts stress the rails. Once the drawer sits low, frost forms along the top edge and the compressor begins running longer.
A frozen defrost drain backs melt water onto the freezer floor, where it turns to ice or runs out when the drawer opens.
Dual evaporators and multiple sensors can produce an uneven temperature pattern. Readings under load identify whether airflow, sensing or refrigeration is responsible.
The refrigerator may keep cooling with a failed interface, damaged harness or communication fault. The main control is not automatically the cause.
Something else in the kitchen acting up? The technician is already there, so the second unit is looked at on the same visit.
Find your city
Pick your metro for the local number, the local team and their recent French door refrigerator jobs.
Questions
Straight answers before you book.
Usually not. That split points first to airflow, a fan, a damper or frost blocking the upper compartment. A temperature and airflow check separates those faults quickly.
The center mullion must fold flat and both gaskets must meet it evenly. Door alignment, a damaged gasket or a mullion-heater fault can each create the same condensation.
Yes. The panel, rails and drawer are checked together so the gasket seals evenly without marking the cabinetry.
The ice system has its own fill valve, tube, sensor and module. Any one can stop production even when both food compartments are at the correct temperature.
For some hinge, rail and sealed-system work, yes. Panels and mounting hardware are removed, protected and reinstalled as part of the visit.
We identify OEM parts from the full model and serial number because boards, valves and fans can change between production runs.
The technician diagnoses the unit on site and gives you a firm written price before work begins. The quoted price does not change once the repair starts.
Book now
Tell us your ZIP, the model number if you have it, and what the refrigerator is doing.
Loading booking form…