Bottom Freezer Repair
Metro Atlanta · Same-day service
Thermador Repair in Jacksonville
1,400+reviews
10+years on built-ins
7 daysa week
What we service
Every Thermador in Your Atlanta Kitchen
Built-in, panel-ready and freestanding, from refrigeration columns to ventilation.
Refrigeration
Cooktops & Rangetops
Ranges, Ovens & Microwaves
Dishwashing & Ventilation
Why us
Why Atlanta Homeowners Choose Us
Thermador leans harder on electronics than most premium kitchens do. That changes what a repair looks like.
We See This Every Day
Induction boards, steam systems and Sapphire electronics are what we open all week. The failure patterns are familiar before the panel is off.
OEM Parts on the Truck
Igniters, spark modules, drain pumps, cooling fans, door gaskets and common control boards ride with the technician.
Written Quote Before We Start
A firm price on site. It does not change once work starts.
Up to 1 Year Warranty
Parts and labor, in writing. Same fault inside that window and we return at no charge.
Same Day, 7 Days a Week
A warm column is not a next-week problem. Same-day slots are held open across metro Atlanta, including weekends.
Built-In and Panel-Ready
Columns and integrated panels come out and go back without marking your cabinetry.
Our work
Recent Thermador Repairs in Jacksonville
Four real service examples with photos from completed Thermador work orders.
1 / 8Recent repair
Magnetron and Mica
Model: Model unreadable
Symptom
The microwave sparked inside the cavity and produced a burning smell, so it could not be used safely.
What we found
The mica waveguide cover was heat-damaged and the magnetron output had deteriorated, leaving carbon tracking near the opening.
Repair
Replaced the magnetron and mica cover, removed the damaged residue, refinished the affected cavity area and tested heating with a measured water load.
Parts and service
- Magnetron
- Mica waveguide cover
- Cavity cleaning and touch-up
Result
The microwave now heats evenly without arcing, smoke or odor, and the repaired cavity area remains clean during operation.
1 / 3Recent repair
Control Board and High-Limit Switch
Model: PODC302/06
Symptom
The display and heating functions became intermittent, leaving the oven unable to complete a normal cycle.
What we found
Testing isolated the fault to the electronic control and relay circuitry rather than the heating elements.
Repair
Replaced the control board, cable connection and high-limit switch; parts and labor carry a 1-year warranty.
Parts and service
- Control board, cable connection and high-limit switch
- Parts and labor carry a 1-year warranty
Result
The display remains stable, the relays engage correctly and the oven completes preheat and cooking cycles. The installed parts and labor are covered for one year.
1 / 2Recent repair
Ignition and Temperature Sensor
Model: P366/04
Symptom
The burners clicked repeatedly, and one or more positions either would not light or could not hold a low flame.
What we found
The ignition circuit had weak output and worn switch or potentiometer contacts were not sending a consistent command.
Repair
Replaced the affected spark and control components, restored the wiring and checked ignition at every burner.
Parts and service
- Ignition components
- Temperature sensor and connectors under the documented warranty
Result
Each burner now sparks only when commanded, lights promptly and adjusts smoothly from high heat to a stable simmer. The documented warranty applies to this repair.
1 / 2Recent repair
Gas Cooktop Service
Model: SGSX365FS/01
Symptom
Several burners were slow to light and the flames were uneven after ignition.
What we found
The burner caps and ignition points were out of alignment, with residue around the burner bases affecting the spark path and gas pattern.
Repair
Removed and cleaned the burner assemblies, aligned the caps and electrodes, serviced the ignition connections and adjusted the burners for an even flame.
Parts and service
- Burner assembly service
- Ignition-electrode alignment
- Flame-pattern and leak check
Result
All burners now light promptly from the knobs and maintain a steady, even flame from low simmer to full output.
Reviews
What Our Clients Say
"Booking was simple, and the technician arrived during the scheduled window. The visit went well."
Lauren P.
"Chris at the office was helpful when I called to schedule. The technician was polite and worked efficiently."
Robert H.
"I received a clear explanation of the cost before the work began. The service met my expectations."
Amanda S.
"The technician showed up on time, answered my questions, and left the area clean."
Brian C.
The process
What Happens After You Call
Four things we commit to, in order.
01
Tell Us What's Wrong
By phone or through the form. We ask what the appliance is doing and for the model number off the plate, so the parts it is likely to need are already on the truck when the technician arrives.
02
You Get a Two-Hour Window
We confirm the window when you book, then text you when the technician sets off.
03
Firm Price Before Any Work
The technician diagnoses on site and writes the price down, including any part that has to be ordered. It does not change once work starts.
04
Warranty in Writing
Parts and labor are covered up to one year, written on your invoice. If the same fault comes back inside that window, we return at no charge.
Discounted Service Call for a 2nd Appliance
Something else in the kitchen acting up? The technician is already there, so the second unit is looked at on the same visit.
Common faults
What Usually Goes Wrong with Thermador
Thermador puts more electronics behind the panel than most premium kitchens. That is where the faults tend to sit.
Induction Cooktop Shuts Off Mid-Cook
Usually heat, not the hob. The cooling fan under the glass clogs or fails, the board overheats and protects itself. Left alone it takes the board with it.
Pans Not Recognised on Induction
A dead coil or its driver board on one zone. The other zones keep working, which is what makes owners think the pan is at fault.
Star Burner Clicks but Will Not Light
Igniter, spark module or a burner cap sitting slightly off its seat. The clicking is the module trying and failing to confirm ignition.
Steam Oven Makes No Steam
The water tank empties but nothing heats. Points at the pump, the level sensor or scale in the boiler after years without descaling.
Sapphire Dishwasher Will Not Drain
Standing water and a flashing panel. Drain pump or the check valve above it, and on Sapphire units the control board is worth testing before ordering anything.
Column Drifting Warm
Each column runs its own sealed system, so one going warm while its neighbour holds is normal and narrows the search to that unit alone.
Oven Door Locked After Self-Clean
The lock motor or its thermal switch stops releasing once the cavity cools. The door is not jammed, the control simply never gets the signal.
Panel-Ready Door Out of Alignment
Custom panels are heavy. Once hinges wear, the door stops closing square and the seal, the temperature and the cabinet gap all go together.
Coverage
Service Areas Across Metro Atlanta
Our technicians run routes through Fulton, Cobb, DeKalb, Gwinnett, Cherokee and Forsyth counties every day.
Fulton
- Atlanta
- Buckhead
- Sandy Springs
- Alpharetta
- Johns Creek
- Milton
- Roswell
Cobb
- Marietta
- East Cobb
- Smyrna
- Vinings
- Kennesaw
- Acworth
- Mableton
DeKalb
- Brookhaven
- Dunwoody
- Decatur
- Druid Hills
- Chamblee
- Tucker
- Avondale Estates
Gwinnett
- Duluth
- Suwanee
- Peachtree Corners
- Norcross
- Lawrenceville
- Buford
- Sugar Hill
Cherokee & Forsyth
- Woodstock
- Canton
- Holly Springs
- Ball Ground
- Cumming
- South Forsyth
- Waleska
Don't see your city? Call now (877) 441-4299 — we cover most of metro Atlanta.
Questions
Frequently Asked Questions
Answered by our dispatch team.
My induction cooktop turns itself off. Is it broken?
Usually it is protecting itself rather than failing. The cooling fan beneath the glass clogs with dust or stops, the control board heats up and shuts the hob down. Caught early it is a fan; left alone the board goes with it.
Do you work on steam and speed ovens?
Yes. Steam systems are their own discipline — water tank, pump, level sensing and scale in the boiler — and most general appliance shops decline them. The technician carries the common parts.
One of my columns is warm and the other is fine.
That is normal and useful. Each column runs its own sealed system, so the fault is inside the warm unit alone and the search narrows immediately.
Do you use original Thermador parts?
We use OEM parts identified by the model and serial number on your unit. Thermador revised boards and pumps across production runs, so the model name alone is not enough to order the right one.
How much does a repair cost?
The technician diagnoses the unit on site and hands you a firm written price before any work begins. It does not change once the work starts.
Is it worth repairing an older built-in?
Usually yes. Replacing a built-in means the cabinetry opening, the panels and the water line all have to work with the new unit, which turns a repair into a kitchen job. If yours is past sensible repair, the technician will say so on site.
Which parts of Atlanta do you cover?
Fulton, Cobb, DeKalb, Gwinnett, Cherokee and Forsyth, with routes running through all six every day. The full city list is in the Coverage section above; if yours is not on it, call and we will tell you straight away whether we reach you.
Brands
Brands We Service
Thermador is what we work on most. These are the other premium brands we take on in the same Atlanta kitchens.
ThermadorGaggenauBoschSub-ZeroWolfMieleVikingJennAirDacorFisher & PaykelMonogramLiebherr
Book now
Book Your Thermador Repair in Atlanta
Tell us what's wrong and we'll call you back to confirm a time. Same-day slots available across metro Atlanta.
Loading booking form…